一、Manual Application – Layout/手动系统-布局图
二、Gluing Gun/胶枪
1.Inlet valve / 入胶阀
6 mm needle
metal-to-metal sealing system
very easy to maintain, replacement less than 5 min
针直径6mm
金属密封系统
易于维护,更换备件时间小于5分钟
2.Dosing Chamber / 定量机胶室
20 / 60 / 100 / 200 / 300ccm ,(usable volume)
Special seal carrier for easy seal replacement
可用容积20/ 60/ 100/ 200/ 300cm3
密封好,易更换
3.Outlet Valve / 出胶阀
3mm / 6 mm needle
Pressure sensor
Integrated heating
Metal-to-metal sealing system
Hard metal nozzle
Very easy to maintain, replacement less than 5 min
针直径3mm/6mm
压力传感︼器
加热集成到出胶阀
金属密封
胶嘴的强度高
易维护,更换备件时间小于5分钟
三、Pump/泵体
1.Components of Material Supply / 供胶系统的组成
2.Single and Double Barrel Pump / 单泵和双泵
Advantage of DBP over SBP / 双泵的优势
When one barrel is empty, other barrel is active and systems works without any interruption
When one barrel is working,other barrel can be replaced without any interruption
当一〓个胶桶用完时,另一个胶桶可以自动开始工〓作,而不需要中断生产。
当一个胶泵在工作时,另一个胶泵可以更换新的胶桶,不需要中断生产。
3.Pump system / 泵系统
Simple and strong construction
Only one cable from control cabinet to pump stand (cable track)
One stand for all barrel sizes 50 L / 200 L
Position sensor for accurate fill level display
Rotatable with one pivot point,easily for maintenance
结构简单,美观,刚性好
从电控柜到泵站只有一根电缆
一个泵站兼容多种容量的胶桶
胶量的监测依靠位置传感器的反馈
可旋转的泵体,围绕着一个固定点,便于维修
四、Application cases/应用案例
Global BMW all-new 3 series production line all use NIMAK adhesive bonding system
全球宝马全新3系生产线都在使用NIMAK涂胶系统
Porsche plant is widely use NIMAK adhesive bonding system in their new project of Cayanne:50systems
保时捷在新卡宴项目中使用☉NIMAK涂胶设备:50systems
Netherlands truck manufacturer DAF plant is using NIMAK adhesive bonding system in their new project: 15 systems
荷兰卡车制造商 DAF 工厂 项目中使用NIMAK涂胶设备:15 systems